Your position:Home > Solution > Special Sludge Solution

                        Municipal Sludge Drying Solution

                        【Production capacity】:0.1~30t/h        
                        【Application range】:Used for drying and quantity reduction of sludge produced from municipal, septic tank, farm, feed farm and pasture.
                        【Applicable material】:Municipal sludge, WWTP sludge and dehydrated sludge from small-medium sized industrial park.
                        【Production introduction】:Taeda municipal sludge drying machine makes use of thermal energy to evaporate moisture in sludge fast. Through reduce moisture, sludge volume can be reduced and harmlessness/quantity reduction aim can be reached.

                        Sales Hotline:

                        0086-18539990967

                        With the development of the economy and urbanization, amount of urban water and sewage discharge are increasing, which results in a sharp increase of municipal sludge amount. It is estimated that the annual output of municipal sludge in our country will exceed 60 million tons by the end of 2020. According to the "Thirteenth Five-Year Plan for Ecological Environment Protection", by the end of 2020, harmless disposal rate of urban sludge at prefecture level and above must reach at least 90%. Municipal sludge is a kind of misplaced resource rich in organic matter, nutrient elements and NPK. Without proper disposal, municipal sludge will cause pollution to air, water, and soil. According to the disposal goal of "reduction, stabilization, harmlessness and resource utilization", common disposal methods include landfill, incineration, agricultural use, construction and engineering products. Dewatering is a restrictive link in sludge disposal at present stage. Water content of municipal sludge generally exceeds 90%. Before harmless and recycling process, water content of sludge must be reduced to less than 60%. While making bricks or other construction and engineering materials by sludge, moisture content needs to be reduced to lower than 40%. While making fertilizer from sludge or incineration for power generation, moisture content needs to be reduced to less than 30%. High water content and strong fluidity of high-yield municipal sludge cause huge economic and environmental burden in its transportation and disposal circle.
                        Therefore, quantity reduction through drying is a key link in municipal sludge treatment technology. After drying, volume and quantity of sludge can be reduced so that to provide convenience for subsequent treatment. However, municipal sludge is rich in hydrophilic substances, such as polyacrylamide and polyaluminum chloride. Hindered by the electrostatic repulsion generated by the negative charge on the surface of the sludge particles, sludge is in large amount and bulky and difficult to dehydrate. Traditional sludge dewatering ways mainly use physical and chemical methods, which can only remove 20% to 25% of free water. Additives will leave metal ions and toxic organic compounds, which will cause secondary pollution. In response to this situation, Zonelion TAEDA has proposed a variety of thermal drying technologies to meet the needs of municipal sludge drying in different regions. If you need deep recycling technical solutions, you can also contact us for entire processing technology and equipment manufacturing support services.
                        In terms of municipal sludge quantity reduction by drying, Zonelion TAEDA® recommends following drying technologies and equipment that have been optimized for many years and are greatly praised: low temperature belt drying system, waste heat low temperature drum drying system, steam rotary drum drying system, rotary drum sludge drying system and air swept rotary wing drying system. You can click on the "Recommended Process" below for details of above dryer and corresponding technology. You can also call us directly for quotation and technical support.

                        Techncial Advantage

                        (1)、Can choose closed circulating drying mode to save running cost, avoid exhaust gas/heat emission and reach environmental protection aim. Can also choose low-cost open type drying mode.
                        (2)、Adopt patent technology which expands application range of dryer in relevant fields. Compared with common dryer, its energy consumption is 30% less, which greatly helps reducing running cost.
                        (3)、Germ kill rate is high after drying; Conform to requirements of environmental protection and hygiene. Odor can be treated by the deodorizing unit to reduce odor pollution.
                        (4)、Microcomputer fully automatic control mode, stable performance and convenient operation; Adopt programmable control mode, can set different drying curves to meet different drying modes of different materials. ;
                        (5)、Adopt first-line brand auxiliary machines to fully guarantee performance of entire unit and equipment;
                        (6)、Set up multiple safety protection functions such as phase sequence protection, phase loss protection, overload protection, high voltage protection and low voltage protection.
                        (7)、Appearance design is beautiful and whole unit occupies small area.

                        Recommended Process

                        • 低溫帶式干燥系統 Low-temp Belt Drying System
                        • 余熱低溫轉筒干燥系統Exhaust Heat Drum Drying
                        • 蒸汽回轉滾筒干燥系統Steam Rotary Drying System
                        • 轉筒污泥烘干系統Rotary Drum Drying System
                        • 風掃旋翼式干燥系統Air Swept Drying System

                        Parameter

                        Model Working principle Working temperature Heat source Occupation area Brand Capacity
                        t/h
                        MED Hot air rotary drum dryer 200-750 electricity, gas, oil, coal and biomass pellets Middle Taeda 0.5-50
                        WWD Circulation hot air mesh belt dryer 60-300 electricity, gas, heat conduction oil, hot water,exhaust gas, heat Large Zonelion 0.05-5
                        OSC Airflow fluid bed dryer 120-750 electricity, gas, oil, coal and biomass pellets Very small 中聯泰達 0.1-10
                        GD Steam tube rotar drum dryer 100-170 steam, heat conduction oil, hot water Relatively large Taeda 0.1-8
                        WRC Low temperature large air volume rotary drum dryer 45-750 flue gas, exhaust gas, steam heat exchanging Relatively large Zonelion 0.1-20

                               Taida Company has three registered trademarks, 中聯泰達,ZONELION and TAEDA. We focuses on providing technical supports and services for various Water Companies and Wastewater Treatment Plants. Taeda sludge drying equipment serves multiple fields and various application situations.

                        Taeda concept: Profession, Efficiency, Innovation and Cohesion

                        Taeda Culture: Whatever is worth doing at all is worth doing well.

                        Whatever is worth doing well is worth doing happily.

                        If you need deep sludge disposal solutions or have already got bid of relevant projects, please contact us for equipment purchase or cooperation discussion.

                        Call Us

                        Taeda always put people at first place. It adheres to fair distribution principle and build talent mechanism which combines competition with encouragement. It leads a road to cooperate with universities. Cultivate talents while utilizing talents. It devotes to cultivate all-round talents with good skills and management abilities in order to forge a famous brand and strong enterprise.

                        Processing Ability

                        • 喬家大院之旅Welding Platform
                        • 籃球比賽增進友誼Drilling Machine
                        • 大型歌唱晚會Edge Milling Machine
                        • 員工風采Vertical Lathe
                        • Rolling Machine

                        Relevant cases

                        Leave Message

                        If you are interested in our company or products, please kindly leave your contact details and requirements here. Please be assured that your personal information will be used only for business communication. Meanwhile, We will get in touch with you as soon as possible for further discussion.

                        • Product:
                        • Name:
                        • Email:
                        • Usage Region:
                        • Your Demand:
                        • Fill in verification code: Change a new code Change a new code

                        ZONELION? TAEDA?. Address of headquarters:High-tech zone, zhengzhou city, China    Sitemap

                        扒开衣服吃胸摸下面无遮挡