Your position:Home > Solution > Special Sludge Solution

Welding Plating Sludge Drying Solution

【Production capacity】:1~30t/h        
【Application range】:Used for drying and reduction of sludge produced from electroplating, welding material production and plating process.
【Applicable material】:Sludge.
【Production introduction】:Welding material plating sludge dryer realizes aim of reduction, stabilization, harmlessness and recycling for sludge.

Sales Hotline:


With the improvement and further development of manufacturing industry, the demand for gas shielded welding wire and submerged arc welding wire is increasing, and entire welding material production industry has also developed rapidly. In the production of welding consumables, a large amount of waste water will be generated during the production process of welding wire electro less plating line, which contains harmful substances. The precipitated material produced in the process of flocculation and dehydration is the welding material plating sludge. This part of sludge contains multiple heavy metals such as Cu, Ni, Cr, Zn and etc. It is a complex solid-liquid mixture. Disposal methods at this stage mainly include landfill, solidification-stabilization and resource utilization. Among them, landfill method not only occupies land, but also cause certain impact on groundwater. Although solidification-stabilization method is featured in high treatment efficiency and simple operation, it does not conform to the 3R principle of solid waste disposal (That is Reduce, Reus and Recycle). Recycling methods refers to recycle and reuse the sludge by special production process and this method is most economic and environmental one (Taeda has provided many similar welding material plating drying resource recycling equipment for Tianjin Welding Enterprises).
 According to customer’s resource-based technical routine, Taeda can provide special drying plans. In terms of sludge drying and reduction for welding material plants, Zonelion Taeda recommends following drying technologies and equipment that have been optimized for many years and are highly praised: low-temperature belt drying system, waste heat low-temperature drum drying system, steam rotary drum drying system, rotary drum sludge drying system, air swept rotary wing drying system. You can click on the "Recommended Process" below for details of above dryer and corresponding technologies. You can also call us directly for quotation and technical support.

Techncial Advantage

* Three-new advantage: form long-term cooperative relations with universities and scientific research institutions to provide new technologies, new ideas and new directions.
* Three-speciality advantage: Professional manufacturing and R&D on drying equipment, combination with professional testing institutions and cooperation with professional research and design institutes. We can provide full-process services from project planning, blueprint design to finished product testing, environmental assessment and laboratory construction.
* Three-deep advantage: Production line holds wide application range and can cover each circle. Process details and equipment design are deeply optimized based on multiple working cases, different projects and years’ R&D.
* Three-large advantage: Taeda holds large standard mechanical manufacture base and establishes cooperation with universities and professional institutes. Taeda also have multiple large automatic manufacture processing lines.

Recommended Process

  • 低溫帶式干燥系統 Low-temp Belt Drying System
  • 余熱低溫轉筒干燥系統Exhaust Heat Drum Drying
  • 蒸汽回轉滾筒干燥系統Steam Rotary Drying System
  • 轉筒污泥烘干系統Rotary Drum Drying System
  • 風掃旋翼式干燥系統Air Swept Drying System


Model Working principle Working temperature Heat source Occupation area Brand Capacity
MED Hot air rotary drum dryer 200-750 electricity, gas, oil, coal and biomass pellets Middle Taeda 0.5-50
WWD Circulation hot air mesh belt dryer 60-300 electricity, gas, heat conduction oil, hot water,exhaust gas, heat Large Zonelion 0.05-5
OSC Airflow fluid bed dryer 120-750 electricity, gas, oil, coal and biomass pellets Very small 中聯泰達 0.1-10
GD Steam tube rotar drum dryer 100-170 steam, heat conduction oil, hot water Relatively large Taeda 0.1-8
WRC Low temperature large air volume rotary drum dryer 45-750 flue gas, exhaust gas, steam heat exchanging Relatively large Zonelion 0.1-20

       Taida Company has three registered trademarks, 中聯泰達,ZONELION and TAEDA. We focuses on providing technical supports and services for various Water Companies and Wastewater Treatment Plants. Taeda sludge drying equipment serves multiple fields and various application situations.

Taeda concept: Profession, Efficiency, Innovation and Cohesion

Taeda Culture: Whatever is worth doing at all is worth doing well.

Whatever is worth doing well is worth doing happily.

If you need deep sludge disposal solutions or have already got bid of relevant projects, please contact us for equipment purchase or cooperation discussion.

Call Us

Taeda always put people at first place. It adheres to fair distribution principle and build talent mechanism which combines competition with encouragement. It leads a road to cooperate with universities. Cultivate talents while utilizing talents. It devotes to cultivate all-round talents with good skills and management abilities in order to forge a famous brand and strong enterprise.

Processing Ability

  • 喬家大院之旅Welding Platform
  • 籃球比賽增進友誼Drilling Machine
  • 大型歌唱晚會Edge Milling Machine
  • 員工風采Vertical Lathe
  • Rolling Machine

Relevant cases

Leave Message

If you are interested in our company or products, please kindly leave your contact details and requirements here. Please be assured that your personal information will be used only for business communication. Meanwhile, We will get in touch with you as soon as possible for further discussion.

  • Product:
  • Name:
  • Email:
  • Usage Region:
  • Your Demand:
  • Fill in verification code: Change a new code Change a new code

ZONELION? TAEDA?. Address of headquarters:High-tech zone, zhengzhou city, China    Sitemap